Difference Between Slotted And Pan Machine Screws

Difference Between Slotted And Pan Machine Screws

At first glance, the main difference between a flathead screwdriver, or more properly called a slotted or flat blade screwdriver, and a Phillips screwdriver should be patently obvious. A flathead has a single blade, and a Phillips has two blades in the shape of a cross. Attempts to use a flathead tool on a screw designed for a Phillips usually won't be successful, and a Phillips screwdriver could never be used on a slotted screw. Both are considered 'driver' tools, which means they are used to force bolts or screws through various types of material.

This is a #4 diameter by 1/2 inch long wood screw that has a slotted oval head. #7 x 5/8 Phillips Pan Head Sheet Metal Screw: A sheet metal screw with a Phillips pan head that is a #7 and is 5/8 inches long. 0-80 x 1/8 Slotted Round Head Machine Screw: This machine screw. Slotted and Phillips screwdrivers work with metric screws, but you must use metric hex keys with metric hex socket screws. Also, Phillips, square, hex and Torx® drive screws are popular because there's less chance for the driver to slip out and scratch finish work. Hex head, like hex cap screws.

There are differences beyond the blade shapes, however. The flathead has been in use far longer than the Phillips. When screws began to replace hammer-driven nails in the manufacturing process, the single slot screwhead was almost universal. A flathead screwdriver became an indispensable tool for woodworkers and other commercial artists. This version is still considered the default model to this day, even with its inherent problems.

Slotted head screw

Slotted Pan Head Screws

The Phillips screwdriver, by comparison, is still a rather new tool option. Invented by Henry Phillips, a tool company owner working in the 1930s, the screwdriver and accompanying screws were intended to provide a safer alternative to the traditional flathead. Henry Phillips wanted a screwdriver that would prevent a damaging process called overtorquing.

Traditional screwdrivers at the time often allowed the user to put too much twisting force, or torque, on the slotted screws. By designing a cross-shaped blade and corresponding cross-shaped screws with a slight depression, Phillips could apply more torque than with a flathead. This mechanical advantage allows users to use their twisting strength more efficiently. The depressions in the screws, however, forced the blades of the Phillips to slip out before any damaging overtorquing could occur.

Difference Between Slotted And Pan Machine Screws

One flaw in the flathead design is the relative strength of the blade, or bit. When a flathead bit is attached to a powered driver, the added force can cause a weaker blade to snap off. In addition, the slotted screw may become stripped if too much torque is applied. This is why the use of the flathead screwdriver is generally limited to woodworking and other light-to-medium industrial applications. Only the strongest flathead driving bits are used for high-torque manufacturing processes.

Difference Between Slotted And Pan Machine Screws Stainless Steel

By comparison, a Phillips screwdriver is very well-suited for industrial processes. Once the Phillips bit is seated securely in the Phillips head screw, the operator can apply much more torque for fastening. Since the screw will force out the bit at the first sign of overtorquing, there is less risk of damage to the product or the bit.

Antique Slotted Screws

Some modern screws accept both flathead and Phillips screwdrivers, although some experts suggest using a Phillips for tightening and a flathead for loosening the screw. One advantage a flathead has over a Phillips, however, is universality. In case of emergency, a number of other flat metal objects, such as coins, butter knives or keys, can be used to tighten or loosen a screw. It is much more difficult to duplicate the fit of a Phillips head.